Bartell B436 Manuale delle Istruzioni Scaricare il pdf (Pagina 12)

WALK-BEHIND TROWEL INSTRUCTION MANUAL

BARTELL MORRISON INC.

31 SUN PAC BLVD, BRAMPTON, ONTARIO, CANADA, L6S 5P6, 905-458-5455 FAX 905-458-5484

Created: 07/04

Revised: 10/08

- 12 -

STORAGE

The following steps should be taken to prepare your

Walk-Behind Power Trowel for extended storage.

1. Close fuel shut off valve.

2. Siphon excess gasoline from tank.

3. Start engine until it stops from lack of fuel. This will

use up all the fuel in the carburetor and prevent

formation of deposits due to evaporation of fuel.

4. Remove spark plug and pour 2 oz. of SAE-30 or

SAE-40 motor oil into the cylinder. Slowly crank the

engine 2 or 3 times to distribute the oil throughout

the cylinder. This will help prevent rust during

storage. Replace spark plug.

5. Store the unit in an upright position in a cool, dry,

well ventilated area.

MAINTENANCE

Maintaining your Walk-Behind Power Trowel will insure

long life to the machine and its components.

AIR CLEANER - Keep air filter clean at all times. Wash

away dust and debris using a non-oil based cleaning

solvent. Let the filter dry before re-installing.

LUBRICATION – Check engine oil regularly. Use

proper engine oil as recommended. See previous

chart. Fill crankcase to levels as recommended in

manufacture’s engine manual.

SPARK PLUG

–

Check and clean spark plugs

regularly. A fouled, dirty or carboned spark plug causes

hard starting and poor engine performance. Set spark

plug gap to recommended clearance. Refer to engine

manual.

BELT TENSION – IMPORTANT!

If there is excessive belt play, there will be a decrease

in the power transmission capability which could lead to

premature wear and failure of the belt. The normal belt

play should be 1/2” to 5/8” which is attained by

depressing one side of the belt at the mid-point of the

span between pulleys. Tighten all engine mount

fasteners.

CHART FOR MINIMUM WIRE SIZE OF EXTENSION CORD

Nameplate AMPS CORD LENGTH

25’ 50’ 100’ 150’

0-6 18 AWG 16 AWG 16 AWG 14 AWG

6-10 18 AWG 16 AWG 14 AWG 12 AWG

10-12 16 AWG 16 AWG 14 AWG 12 AWG

12-16 14 AWG 12 AWG (NOT RECOMMENDED)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Commenti su questo manuale

Nessun commento

Bartell B436 Manuale delle Istruzioni Pagina 12

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Bartell B436